ATEN CS1953 3-Port USB-C True 4K DisplayPort Hybrid KVM Switch with USB 3.0 Peripheral Support

€328.39 €271.40
Item in stock
3-Port USB-C DisplayPort Hybrid KVMP™ Switch

Features

  • One USB keyboard, mouse and one DisplayPort monitor control two DisplayPort computers, one USB-C device and share two USB peripherals
  • Supports superior video quality – up to 4K DCI (4096 x 2160 @ 60Hz)
  • Provides USB Power Delivery 3.0 for USB-C device charging up to 45W1
  • Computer selection via pushbuttons, hotkeys, mouse2, and remote port selector
  • Built-in 2-port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
  • Supports DisplayPort Alternate Mode (DP Alt Mode) which enables the USB connection to carry DisplayPort signals
  • DisplayPort 1.2 compliant; HDCP 1.4 compliant3
  • Independent switching of KVM, USB peripheral, and audio focus4
  • Supports HD Audio4
  • Supports DisplayPort Dual-Mode technology (DP++)5
  • Firmware upgradeable
  • Bus-powered6

    Note:
    1. An additional power adapter is needed on the CS1953 for USB-C device charging to work.
    2. Mouse port switching is only supported under mouse emulation mode with a USB 3-button mouse wheel.
    3. For DisplayPort 1.4 compliant display device, make sure to configure the device setting to be compatible with DisplayPort 1.2 to avoid compatibility issue.
    4. HD audio through DisplayPort channel cannot be switched independently.
    5. DisplayPort Dual-Mode technology (DP++) does not require an active adapter for most single display setups. Active DisplayPort adapters are recommended if you are unsure of the video source’s DP++ compatibility.
    6. The unit can be bus-powered by the connected KVM sources via USB ports.

Diagram

Content

1x CS1953 3-Port USB-C DisplayPort Hybrid KVMP™ Switch
2x LIN5-20K1-K13G DisplayPort 1.2 cables
2x LIN6-11C1-E12G USB 3.0 Type-A to Type-B cables
1x LIN6-22B1-B12G USB-C cable
3x LIN5-0205-21CG audio cables
1x 2XRT-0016G remote port selector
1 x power adapter (only applicable for the with-power-adapter option)
1x user instructions

Specifications

Computer Connections3
Port SelectionHotkey, Pushbutton, Mouse, Remote Port Selector
Connectors
Console Ports2 x USB Type A Female
1 x DisplayPort Female (Black)
2 x 3.5mm Audio Jack Female (Green; 1 x front, 1 x rear)
KVM (Computer) PortsCPU1 and CPU2:
2 x USB3.1 Gen1 Type B Female (Blue)
2 x DisplayPort Female (Black)
2 x 3.5mm Audio Jack Female (Green)
CPU3:
1 x USB Type-C Female (Black)
1 x 3.5mm Audio Jack Female (Green)
Remote Port Selector1 x 2.5mm Audio Jack Female (Black)
Power1 x DC Jack
USB Hub2 x USB3.1 Gen1 Type A Female (Blue; 1 x front, 1 x rear)
Switches
Selected3 x Pushbutton
Mode Switch1 x Slide Switch
LEDs
Audio3 (Green)
KVM3 (Orange)
USB3 (Green)
Emulation
Keyboard / MouseUSB
VideoUp to 4096 x 2160 @ 60Hz, 2560 x 1440 @ 144Hz
Scan Interval1-99 Seconds (Default: 5 sec.)
Power ConsumptionDC12V:5.78W:269BTU/h
Environmental
Operating Temperature0-40°C
Storage Temperature-20-60°C
Humidity0-80% RH, Non-condensing
Physical Properties
HousingMetal, Plastic
Weight0.50 kg ( 1.1 lb )
Dimensions (L x W x H)20.63 x 7.54 x 4.40 cm
(8.12 x 2.97 x 1.73 in.)
Write Your Own Review
You're reviewing:ATEN CS1953 3-Port USB-C True 4K DisplayPort Hybrid KVM Switch with USB 3.0 Peripheral Support
Your Rating